Hoyer archtop guitar serial#
Hoyer archtop guitar full#
Hoyer archtop guitar professional#
Hoyer archtop guitar crack#

The earliest Gibson designs (L1 to е…ѓ) introduced the arched top and increasing body sizes, but still had round or oval sound holes. These inexpensive instruments, manufactured by companies such as Stella and Harmony, are associated with early blues musicians. Another transitional design is the parlor guitar fitted with a floating bridge and tailpiece. Back obtained patent #508,858 in 1893 for a guitar (which also mentions applicability to mandolins) that among other features included an arched top, which were produced under the Howe Orme name. with egg-shaped hoop or sides and a graduated convex back and top.' The instrument featured a metal tailpiece and teardrop shaped 'f-holes,' and strongly resembled the archtop guitars of the 1930s. Merrill, for example, patented in 1896 a very modern looking instrument 'of the guitar and mandolin type. which, if employed, would rob the instrument of much of its volume of tone.' Д«ut Gibson was not the first to apply violin design principles to the guitar. His 1898 patent for a mandolin, which was also applicable to guitars according to the specifications, was intended to enhance 'power and quality of tone.' Among the features of this instrument were a violin-style arched top and back, each carved from a single piece of wood, and thicker in the middle than at the sides sides carved to shape from a single block of wood and a lack of internal 'braces, splices, blocks, or bridges. The archtop guitar is often credited to Orville Gibson, whose innovative designs led to the formation of the Gibson Mandolin-Guitar Mfg.

This was a transitional model with no f-holes and a much smaller body than the classic archtop.

Hoyer archtop guitar serial#

Serial Number: N/A, but built during the 1950вЂ™s at the Hoyer shop in Erlangen, Germany.A 1918 'The Gibson' acoustic guitar, with a 13th fret neck join, circular sound hole, and floating bridge. Hoyer guitars is still producing instruments, and you can visit their website here. Consequently, spraying the top with a wax or polish and rubbing the surface can easily remove all or parts of the logo! The logo is painted directly onto the top, and there are not clear coats over top. A tech tip about this sort of decoration, which was also seen on many American guitars вЂ“ cleaning the area presents a number of issues. The screened gold logo on the lower treble side reads вЂњOriginal Arnold Hoyer nur echt mit diesem zeichenвЂќ, or вЂњOnly real with this signвЂќ. The hardware seems original вЂ“ a nickel plated trapeze tailpiece, a metal bridge with adjustable saddles, a large faux pearl pickguard, and open back strip tuners with creme plastic buttons. The top features both a small round soundhole at the end of the fingerboard and traditional F-holes.

Hoyer archtop guitar full#

The position marker inlays, typical of many German instruments, are the full width of the fingerboard. The bound headstock has an inlay reading вЂArnold Hoyer Herr im FrackвЂ™. The Herr im Frack features a carved spruce top and probably laminate Maple back and sides, and a maple neck with a bound rosewood fingerboard and an ebony bridge base. It plays well, and sounds remarkably good.

Hoyer archtop guitar crack#

This 1950s Arnold Hoyer Archtop Herr im Frack is in good playable condition, and aside from a repaired crack in the heel and a repaired crack in the top next to the bass side of the fingerboard tag, is in good physical condition. These instruments were very important as quality guitars were in short supply during the long recovery from the war.

Hoyer archtop guitar professional#

The Arnold Hoyer archtop Herr im Frack, or вЂGentleman in TailsвЂ™ was introduced in the late 1940s and was popular throughout the 1950s as a professional quality guitar. They settled in Tennelohe, near Erlanger, which like Schonbach was a major center for musical instrument building. With the end of the Second World War, the Hoyer family had to leave Schonbach and moved into Germany.

The Hoyer guitar name dates to 1874, with Franz Hoyer opening a shop in Schonbach, a town in what is now the Czech Republic and produced all manner of popular instruments including lutes, zithers and guitars.